FAQs‎ > ‎

Can I connect to a Wi-Fi OBD2 adapter on iOS and still use mobile data?

posted 5 Oct 2018, 04:19 by Planet Coops   [ updated 5 Oct 2018, 06:53 ]
Yes, follow these steps:
  1. Connect your iPhone to the Wi-Fi network for your OBD2 adapter.
  2. Open the Settings app, select Wi-Fi then select the blue info icon to the right of your OBD2 Wi-Fi network.
  3. Make a note of both the IP Address and the Subnet Mask addresses.
  4. Set Configure IPv4 to Manual and enter only the IP Address and Subnet Mask addresses from Step 3.  Leave Router blank.